Case Studies

An 18 way CSP18PT enclosure gave enough room on the front for the free-issued PDL gear and plenty of room for internal expansion in the future. The cover below the din window measures 400 x 245mm, ...

This switchboard is made from the Cubo P Panel Building System. One of the benefits from using this panel bulding system is that the bases make it easy to section and delegate specific functions to...

A PolyBox gives more protection, can be locked when not in use, and has all the room needed inside for four PDL 56 series plugs. Another great design benefit is that the plugs are mounted deep with...

A PolyBox, which is IP69 & IK10 is the best outdoor solution to efficiently house the meter and main switch. The adjustible corner elevators allows the meter panel to be mounted at any height t...

By designing and constructing this board using Cubo P, we were able to efficiently consolodate the meters, controls and 100A MOG switch into one main switchboard.

A Cubo P switchboard mounted in an aluminium shroud for extra protection with an emergency stop, overfill sensors, DOL starters and various sensors and relays. This design means that the breakers a...

A Cubo P enclosure system that comprises of four 300 x 600 x 185mm enclosures joined together. Two enclosures house the distribution and MOG switches - these have hinging covers to access the switc...

Cost efficient polycarbonate solutions with more room, higher impact and ingress rating and, in some cases, can be added to in the future. emf also stocks Al to Cu Clampo Pro Terminals to make term...

A series of lockable 3mm Aluminium powder coated kiosks 1850 x 1100 and 550mm deep (to make it harder to push over) was ordered to house the various pump station switchboards. The peaked cover of t...

An IP65, weather and UV proof enclosure was used to future proof this switchboard and provides extra security to the breakers and internal components. The existing meter was replaced with a smart m...

Cubo P was used as this is the most adaptable switchboard system to add to in the future and is a weather, chemical, and UV safe enclosure. Two 6TP, 100A, 24module multiclip distribution systems we...

125A temporary generator inlet mounted in an IP69and IK10 polycarbonate enclosure. Coppertoaluminum transition terminals enable up to 95mm aluminum cable to be terminated direct...

This meter panel is used in a residential application although similar panels can be mounted or recessed onto any building. The straight, flat sides of this Cubo P enclosure means that the panel ca...

Here is where the Polybox comes into play. With 4mm thick walls, Hydrophobic seal and non-metallic latches as standard, it can withstand any pressure applied to the plug sockets without the walls f...

Through our ADAPT team,wemanagedtomodernizethe previous system and meet the needs of a newly renovated block. Wedeveloped a Cubo O enclosurethat was weatherproof,...

A Polybox meter board provided an efficient, safe, and extremely weatherproof solution that was easy to install and will be simple to maintain. The hinging meter panel can be mounted at any depth d...

We used Cubo O as this was the most robust enclosure available and easily adaptable to fit the power outlet on the side. The enclosure has space for two rows of din rail (12 modules each) so that a...

Cubo D enclosures are small compact enclosures that met the customer's specifications as the enclosures are moulded thermoplastic which is designed to withstand high UV, and the hydrophobic seal wi...

We used a combination of Ensto Cubo P and IDE Star enclosures, both fitted with PDL outdoor power outlets. The Cubo P system is a combinable enclosure system that can be expanded in the future if ...

By utilising the Cubo O system, we were able to build IP65, IK08, future-proofed and practical switchboards that were fast and easy to install. The size of the enclosures means that there will be e...

The Ensto Polybox was the most obvious choice as it is designed to be able to rough it out in tough and demanding environments. Rated at IP 69 and an IK rating of 10, means that the Polyb...

We used Cubo P in this project as it gave us the flexibility to match the existing mounting points and conduit entry points. As a fully customizable and joinable switchboard system, it was easy to ...